| 💥 ERROR | 🔥 FAIL | ⚠️ WARN | ⏩ SKIP | ℹ️ INFO | ✅ PASS |
|---|---|---|---|---|---|
| 0 | 0 | 33 | 716 | 49 | 593 |
| 0% | 0% | 14% | 311% | 21% | 258% |
Note: The following loglevels were omitted in this report: SKIP, INFO, PASS, DEBUG
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: uni2783 Contours detected: 3 Expected: 4
- Glyph name: uni2783 Contours detected: 3 Expected: 4
[code: contour-count]
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: uni2783 Contours detected: 3 Expected: 4
- Glyph name: uni2783 Contours detected: 3 Expected: 4
[code: contour-count]
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: uni2783 Contours detected: 3 Expected: 4
- Glyph name: uni2783 Contours detected: 3 Expected: 4
[code: contour-count]
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: uni2783 Contours detected: 3 Expected: 4
- Glyph name: uni2783 Contours detected: 3 Expected: 4
[code: contour-count]
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: at Contours detected: 4 Expected: 2
- Glyph name: uni2783 Contours detected: 3 Expected: 4
- Glyph name: at Contours detected: 4 Expected: 2
- Glyph name: uni2783 Contours detected: 3 Expected: 4
[code: contour-count]
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: uni2783 Contours detected: 3 Expected: 4
- Glyph name: uni2783 Contours detected: 3 Expected: 4
[code: contour-count]
The most common width is 670 among a set of 13 math glyphs. The following math glyphs have a different width, though:
Width = 646: uni2283, uni2285, uni2284, uni2282, uni2208, uni2209
Width = 578: congruent
Width = 655: uni2286, uni228A, uni2287, uni2288, uni2289
Width = 640: uni228B [code: width-outliers]
The most common width is 670 among a set of 13 math glyphs. The following math glyphs have a different width, though:
Width = 623: uni2283, uni2285, uni2284, uni2282, uni2208, uni2209
Width = 597: congruent
Width = 632: uni2286, uni228A, uni2287, uni2288, uni2289
Width = 626: uni228B [code: width-outliers]
The most common width is 670 among a set of 13 math glyphs. The following math glyphs have a different width, though:
Width = 658: uni2283, uni2285, uni2284, uni2282, uni2208, uni2209
Width = 569: congruent
Width = 667: uni2286, uni228A, uni2287, uni2288, uni2289
Width = 647: uni228B [code: width-outliers]
The most common width is 670 among a set of 13 math glyphs. The following math glyphs have a different width, though:
Width = 635: uni2283, uni2285, uni2284, uni2282, uni2208, uni2209
Width = 587: congruent
Width = 644: uni2286, uni228A, uni2287, uni2288, uni2289
Width = 633: uni228B [code: width-outliers]
The most common width is 670 among a set of 13 math glyphs. The following math glyphs have a different width, though:
Width = 608: congruent, uni2283, uni2285, uni2282, uni2284, uni2208, uni2209
Width = 617: uni2286, uni228A, uni2287, uni228B, uni2288, uni2289 [code: width-outliers]
The most common width is 670 among a set of 19 math glyphs. The following math glyphs have a different width, though:
Width = 559: congruent
Width = 679: uni2286, uni228A, uni2287, uni2288, uni2289
Width = 654: uni228B [code: width-outliers]
The following glyphs have on-curve points which have potentially incorrect y coordinates:
* ampersand (U+0026): X=371.5,Y=-1.0 (should be at baseline 0?)
* a (U+0061): X=156.5,Y=488.0 (should be at x-height 489?)
* l (U+006C): X=234.0,Y=2.0 (should be at baseline 0?)
* r (U+0072): X=341.0,Y=491.0 (should be at x-height 489?)
* ordfeminine (U+00AA): X=122.0,Y=681.5 (should be at cap-height 681?)
* macron (U+00AF): X=132.0,Y=683.0 (should be at cap-height 681?)
* macron (U+00AF): X=421.0,Y=683.0 (should be at cap-height 681?)
* uni00B2 (U+00B2): X=177.0,Y=683.0 (should be at cap-height 681?)
* onequarter (U+00BC): X=101.0,Y=-2.0 (should be at baseline 0?)
* onehalf (U+00BD): X=101.0,Y=-2.0 (should be at baseline 0?)
* threequarters (U+00BE): X=192.0,Y=-2.0 (should be at baseline 0?)
* Aring (U+00C5): X=252.0,Y=942.0 (should be at ascender 940?)
* Aring (U+00C5): X=413.5,Y=942.0 (should be at ascender 940?)
* Oslash (U+00D8): X=464.5,Y=682.0 (should be at cap-height 681?)
* Oslash (U+00D8): X=283.5,Y=-1.0 (should be at baseline 0?)
* atilde (U+00E3): X=337.5,Y=679.5 (should be at cap-height 681?)
* eth (U+00F0): X=230.5,Y=683.0 (should be at cap-height 681?)
* ntilde (U+00F1): X=362.5,Y=679.5 (should be at cap-height 681?)
* otilde (U+00F5): X=365.5,Y=679.5 (should be at cap-height 681?)
* amacron (U+0101): X=110.0,Y=683.0 (should be at cap-height 681?)
* amacron (U+0101): X=399.0,Y=683.0 (should be at cap-height 681?)
* emacron (U+0113): X=126.0,Y=683.0 (should be at cap-height 681?)
* emacron (U+0113): X=415.0,Y=683.0 (should be at cap-height 681?)
* uni0122 (U+0122): X=371.0,Y=-261.5 (should be at descender -260?)
* imacron (U+012B): X=8.0,Y=683.0 (should be at cap-height 681?)
* imacron (U+012B): X=239.0,Y=683.0 (should be at cap-height 681?)
* uni0136 (U+0136): X=327.0,Y=-261.5 (should be at descender -260?)
* uni0137 (U+0137): X=275.0,Y=-261.5 (should be at descender -260?)
* lacute (U+013A): X=234.0,Y=2.0 (should be at baseline 0?)
* uni013B (U+013B): X=281.0,Y=-261.5 (should be at descender -260?)
* uni013C (U+013C): X=234.0,Y=2.0 (should be at baseline 0?)
* uni013C (U+013C): X=151.0,Y=-261.5 (should be at descender -260?)
* lcaron (U+013E): X=234.0,Y=2.0 (should be at baseline 0?)
* lslash (U+0142): X=255.0,Y=2.0 (should be at baseline 0?)
* uni0145 (U+0145): X=367.0,Y=-261.5 (should be at descender -260?)
* uni0146 (U+0146): X=281.0,Y=-261.5 (should be at descender -260?)
* omacron (U+014D): X=138.0,Y=683.0 (should be at cap-height 681?)
* omacron (U+014D): X=427.0,Y=683.0 (should be at cap-height 681?)
* uni0156 (U+0156): X=314.0,Y=-261.5 (should be at descender -260?)
* uni0157 (U+0157): X=123.0,Y=-261.5 (should be at descender -260?)
* Scedilla (U+015E): X=242.0,Y=-2.0 (should be at baseline 0?)
* Scedilla (U+015E): X=318.0,Y=-2.0 (should be at baseline 0?)
* umacron (U+016B): X=130.0,Y=683.0 (should be at cap-height 681?)
* umacron (U+016B): X=419.0,Y=683.0 (should be at cap-height 681?)
* Uring (U+016E): X=257.0,Y=942.0 (should be at ascender 940?)
* Uring (U+016E): X=418.5,Y=942.0 (should be at ascender 940?)
* uni0218 (U+0218): X=218.0,Y=-258.0 (should be at descender -260?)
* uni0219 (U+0219): X=238.0,Y=-261.5 (should be at descender -260?)
* uni021A (U+021A): X=282.0,Y=-261.5 (should be at descender -260?)
* uni021B (U+021B): X=230.0,Y=-261.5 (should be at descender -260?)
* tilde (U+02DC): X=360.5,Y=679.5 (should be at cap-height 681?)
* tildecomb (U+0303): X=360.5,Y=679.5 (should be at cap-height 681?)
* uni0304 (U+0304): X=132.0,Y=683.0 (should be at cap-height 681?)
* uni0304 (U+0304): X=421.0,Y=683.0 (should be at cap-height 681?)
* uni0326 (U+0326): X=279.0,Y=-261.5 (should be at descender -260?)
* uni1EBD (U+1EBD): X=353.5,Y=679.5 (should be at cap-height 681?)
* quoteright (U+2019): X=53.5,Y=681.5 (should be at cap-height 681?)
* quotedblright (U+201D): X=53.5,Y=681.5 (should be at cap-height 681?)
* quotedblright (U+201D): X=280.5,Y=681.5 (should be at cap-height 681?)
* fraction (U+2044): X=-141.0,Y=-2.0 (should be at baseline 0?)
* uni2076 (U+2076): X=246.5,Y=680.5 (should be at cap-height 681?)
* uni2078 (U+2078): X=211.0,Y=679.5 (should be at cap-height 681?)
* uni2078 (U+2078): X=143.0,Y=679.5 (should be at cap-height 681?)
* uni2088 (U+2088): X=20.0,Y=-2.0 (should be at baseline 0?)
* arrowupdn (U+2195): X=253.0,Y=-262.0 (should be at descender -260?)
* emptyset (U+2205): X=113.0,Y=1.0 (should be at baseline 0?)
* fl (U+FB02): X=571.0,Y=2.0 (should be at baseline 0?) [code: found-misalignments]
The following glyphs have on-curve points which have potentially incorrect y coordinates:
* numbersign (U+0023): X=462.0,Y=-2.0 (should be at baseline 0?)
* numbersign (U+0023): X=327.0,Y=-2.0 (should be at baseline 0?)
* numbersign (U+0023): X=230.0,Y=-2.0 (should be at baseline 0?)
* numbersign (U+0023): X=94.0,Y=-2.0 (should be at baseline 0?)
* percent (U+0025): X=618.0,Y=682.0 (should be at cap-height 681?)
* ampersand (U+0026): X=372.0,Y=-1.5 (should be at baseline 0?)
* ampersand (U+0026): X=419.5,Y=682.5 (should be at cap-height 681?)
* a (U+0061): X=152.0,Y=488.5 (should be at x-height 490?)
* a (U+0061): X=272.0,Y=-1.5 (should be at baseline 0?)
* f (U+0066): X=244.0,Y=488.0 (should be at x-height 490?)
* h (U+0068): X=279.0,Y=489.5 (should be at x-height 490?)
* l (U+006C): X=256.0,Y=-1.0 (should be at baseline 0?)
* braceleft (U+007B): X=262.0,Y=-2.0 (should be at baseline 0?)
* braceleft (U+007B): X=305.0,Y=-2.0 (should be at baseline 0?)
* braceright (U+007D): X=29.0,Y=-2.0 (should be at baseline 0?)
* braceright (U+007D): X=71.0,Y=-2.0 (should be at baseline 0?)
* ordfeminine (U+00AA): X=113.0,Y=680.5 (should be at cap-height 681?)
* plusminus (U+00B1): X=89.0,Y=-1.0 (should be at baseline 0?)
* plusminus (U+00B1): X=582.0,Y=-1.0 (should be at baseline 0?)
* agrave (U+00E0): X=272.0,Y=-1.5 (should be at baseline 0?)
* aacute (U+00E1): X=272.0,Y=-1.5 (should be at baseline 0?)
* acircumflex (U+00E2): X=272.0,Y=-1.5 (should be at baseline 0?)
* atilde (U+00E3): X=272.0,Y=-1.5 (should be at baseline 0?)
* atilde (U+00E3): X=461.0,Y=679.0 (should be at cap-height 681?)
* adieresis (U+00E4): X=272.0,Y=-1.5 (should be at baseline 0?)
* aring (U+00E5): X=272.0,Y=-1.5 (should be at baseline 0?)
* aring (U+00E5): X=297.0,Y=679.0 (should be at cap-height 681?)
* aring (U+00E5): X=233.0,Y=679.0 (should be at cap-height 681?)
* ntilde (U+00F1): X=476.0,Y=679.0 (should be at cap-height 681?)
* otilde (U+00F5): X=476.0,Y=679.0 (should be at cap-height 681?)
* amacron (U+0101): X=272.0,Y=-1.5 (should be at baseline 0?)
* abreve (U+0103): X=272.0,Y=-1.5 (should be at baseline 0?)
* aogonek (U+0105): X=272.0,Y=-1.5 (should be at baseline 0?)
* eogonek (U+0119): X=353.0,Y=2.0 (should be at baseline 0?)
* lacute (U+013A): X=256.0,Y=-1.0 (should be at baseline 0?)
* uni013C (U+013C): X=256.0,Y=-1.0 (should be at baseline 0?)
* lcaron (U+013E): X=256.0,Y=-1.0 (should be at baseline 0?)
* lslash (U+0142): X=296.0,Y=-1.0 (should be at baseline 0?)
* uring (U+016F): X=306.0,Y=679.0 (should be at cap-height 681?)
* uring (U+016F): X=242.0,Y=679.0 (should be at cap-height 681?)
* uni01CE (U+01CE): X=272.0,Y=-1.5 (should be at baseline 0?)
* ring (U+02DA): X=316.0,Y=679.0 (should be at cap-height 681?)
* ring (U+02DA): X=252.0,Y=679.0 (should be at cap-height 681?)
* tilde (U+02DC): X=480.0,Y=679.0 (should be at cap-height 681?)
* tildecomb (U+0303): X=480.0,Y=679.0 (should be at cap-height 681?)
* uni030A (U+030A): X=316.0,Y=679.0 (should be at cap-height 681?)
* uni030A (U+030A): X=252.0,Y=679.0 (should be at cap-height 681?)
* uni1EBD (U+1EBD): X=463.0,Y=679.0 (should be at cap-height 681?)
* quotedblbase (U+201E): X=253.0,Y=-2.0 (should be at baseline 0?)
* quotedblbase (U+201E): X=508.0,Y=-2.0 (should be at baseline 0?)
* uni2077 (U+2077): X=342.0,Y=680.0 (should be at cap-height 681?)
* uni2088 (U+2088): X=19.0,Y=1.0 (should be at baseline 0?)
* uni2088 (U+2088): X=346.0,Y=1.0 (should be at baseline 0?)
* logicalor (U+2228): X=272.0,Y=-2.0 (should be at baseline 0?)
* logicalor (U+2228): X=379.0,Y=-2.0 (should be at baseline 0?)
* uni2288 (U+2288): X=504.0,Y=683.0 (should be at cap-height 681?)
* uni2289 (U+2289): X=409.0,Y=683.0 (should be at cap-height 681?)
* fl (U+FB02): X=605.0,Y=-1.0 (should be at baseline 0?) [code: found-misalignments]
The following glyphs have on-curve points which have potentially incorrect y coordinates:
* ampersand (U+0026): X=181.5,Y=682.5 (should be at cap-height 681?)
* bracketleft (U+005B): X=299.0,Y=679.0 (should be at cap-height 681?)
* bracketleft (U+005B): X=188.0,Y=679.0 (should be at cap-height 681?)
* bracketright (U+005D): X=13.0,Y=679.0 (should be at cap-height 681?)
* bracketright (U+005D): X=123.0,Y=679.0 (should be at cap-height 681?)
* f (U+0066): X=314.0,Y=682.0 (should be at cap-height 681?)
* r (U+0072): X=333.0,Y=490.0 (should be at x-height 488?)
* t (U+0074): X=324.0,Y=2.0 (should be at baseline 0?)
* cent (U+00A2): X=223.0,Y=-2.0 (should be at baseline 0?)
* cent (U+00A2): X=336.0,Y=-2.0 (should be at baseline 0?)
* copyright (U+00A9): X=131.0,Y=683.0 (should be at cap-height 681?)
* copyright (U+00A9): X=537.5,Y=683.0 (should be at cap-height 681?)
* ordfeminine (U+00AA): X=126.5,Y=682.0 (should be at cap-height 681?)
* registered (U+00AE): X=537.5,Y=683.0 (should be at cap-height 681?)
* registered (U+00AE): X=131.0,Y=683.0 (should be at cap-height 681?)
* uni00B2 (U+00B2): X=204.0,Y=680.5 (should be at cap-height 681?)
* uni00B2 (U+00B2): X=136.5,Y=679.5 (should be at cap-height 681?)
* uni00B3 (U+00B3): X=188.0,Y=681.5 (should be at cap-height 681?)
* paragraph (U+00B6): X=190.0,Y=682.0 (should be at cap-height 681?)
* onequarter (U+00BC): X=87.0,Y=-1.0 (should be at baseline 0?)
* onehalf (U+00BD): X=87.0,Y=-1.0 (should be at baseline 0?)
* threequarters (U+00BE): X=179.0,Y=-1.0 (should be at baseline 0?)
* Oslash (U+00D8): X=472.0,Y=680.0 (should be at cap-height 681?)
* Oslash (U+00D8): X=283.0,Y=1.0 (should be at baseline 0?)
* atilde (U+00E3): X=267.0,Y=679.0 (should be at cap-height 681?)
* ntilde (U+00F1): X=296.0,Y=679.0 (should be at cap-height 681?)
* otilde (U+00F5): X=301.0,Y=679.0 (should be at cap-height 681?)
* eogonek (U+0119): X=347.0,Y=-2.0 (should be at baseline 0?)
* uni0122 (U+0122): X=297.0,Y=-261.0 (should be at descender -260?)
* uni0136 (U+0136): X=252.0,Y=-261.0 (should be at descender -260?)
* uni0137 (U+0137): X=193.0,Y=-261.0 (should be at descender -260?)
* uni013B (U+013B): X=210.0,Y=-261.0 (should be at descender -260?)
* uni013C (U+013C): X=70.0,Y=-261.0 (should be at descender -260?)
* uni0145 (U+0145): X=294.0,Y=-261.0 (should be at descender -260?)
* uni0146 (U+0146): X=204.0,Y=-261.0 (should be at descender -260?)
* uni0156 (U+0156): X=242.0,Y=-261.0 (should be at descender -260?)
* uni0157 (U+0157): X=43.0,Y=-261.0 (should be at descender -260?)
* Scedilla (U+015E): X=247.0,Y=-1.0 (should be at baseline 0?)
* Scedilla (U+015E): X=316.0,Y=-1.0 (should be at baseline 0?)
* tcaron (U+0165): X=324.0,Y=2.0 (should be at baseline 0?)
* uni0218 (U+0218): X=220.0,Y=-262.0 (should be at descender -260?)
* uni0219 (U+0219): X=158.0,Y=-261.0 (should be at descender -260?)
* uni021A (U+021A): X=202.0,Y=-261.0 (should be at descender -260?)
* uni021B (U+021B): X=324.0,Y=2.0 (should be at baseline 0?)
* uni021B (U+021B): X=145.0,Y=-261.0 (should be at descender -260?)
* tilde (U+02DC): X=292.0,Y=679.0 (should be at cap-height 681?)
* tildecomb (U+0303): X=292.0,Y=679.0 (should be at cap-height 681?)
* uni0326 (U+0326): X=199.0,Y=-261.0 (should be at descender -260?)
* pi (U+03C0): X=613.0,Y=2.0 (should be at baseline 0?)
* uni1EBD (U+1EBD): X=290.0,Y=679.0 (should be at cap-height 681?)
* fraction (U+2044): X=-150.0,Y=-1.0 (should be at baseline 0?)
* uni2075 (U+2075): X=299.0,Y=679.0 (should be at cap-height 681?)
* uni2075 (U+2075): X=122.0,Y=679.0 (should be at cap-height 681?)
* uni2077 (U+2077): X=207.0,Y=679.0 (should be at cap-height 681?)
* uni2077 (U+2077): X=20.0,Y=679.0 (should be at cap-height 681?)
* uni2080 (U+2080): X=136.0,Y=-2.0 (should be at baseline 0?)
* uni2080 (U+2080): X=236.5,Y=-2.0 (should be at baseline 0?)
* uni2088 (U+2088): X=230.0,Y=1.0 (should be at baseline 0?)
* uni2088 (U+2088): X=117.0,Y=1.0 (should be at baseline 0?)
* uni2169 (U+2169): X=29.0,Y=-2.0 (should be at baseline 0?)
* uni2169 (U+2169): X=677.0,Y=-2.0 (should be at baseline 0?)
* uni222A (U+222A): X=282.0,Y=2.0 (should be at baseline 0?)
* circle (U+25CB): X=251.5,Y=2.0 (should be at baseline 0?)
* circle (U+25CB): X=529.0,Y=2.0 (should be at baseline 0?)
* uni25CC (U+25CC): X=356.0,Y=2.0 (should be at baseline 0?)
* uni25CC (U+25CC): X=408.0,Y=2.0 (should be at baseline 0?)
* uni2780 (U+2780): X=251.5,Y=2.0 (should be at baseline 0?)
* uni2780 (U+2780): X=529.0,Y=2.0 (should be at baseline 0?)
* uni2781 (U+2781): X=251.5,Y=2.0 (should be at baseline 0?)
* uni2781 (U+2781): X=529.0,Y=2.0 (should be at baseline 0?)
* uni2782 (U+2782): X=251.5,Y=2.0 (should be at baseline 0?)
* uni2782 (U+2782): X=529.0,Y=2.0 (should be at baseline 0?)
* uni2783 (U+2783): X=251.5,Y=2.0 (should be at baseline 0?)
* uni2783 (U+2783): X=529.0,Y=2.0 (should be at baseline 0?)
* uni2784 (U+2784): X=251.5,Y=2.0 (should be at baseline 0?)
* uni2784 (U+2784): X=529.0,Y=2.0 (should be at baseline 0?)
* uni2785 (U+2785): X=251.5,Y=2.0 (should be at baseline 0?)
* uni2785 (U+2785): X=529.0,Y=2.0 (should be at baseline 0?)
* uni2786 (U+2786): X=251.5,Y=2.0 (should be at baseline 0?)
* uni2786 (U+2786): X=529.0,Y=2.0 (should be at baseline 0?)
* uni2787 (U+2787): X=251.5,Y=2.0 (should be at baseline 0?)
* uni2787 (U+2787): X=529.0,Y=2.0 (should be at baseline 0?)
* uni2788 (U+2788): X=251.0,Y=2.0 (should be at baseline 0?)
* uni2788 (U+2788): X=528.5,Y=2.0 (should be at baseline 0?)
* fi (U+FB01): X=314.0,Y=682.0 (should be at cap-height 681?)
* fl (U+FB02): X=314.0,Y=682.0 (should be at cap-height 681?)
* u1F10B (U+1F10B): X=251.5,Y=2.0 (should be at baseline 0?)
* u1F10B (U+1F10B): X=529.0,Y=2.0 (should be at baseline 0?) [code: found-misalignments]
The following glyphs have on-curve points which have potentially incorrect y coordinates:
* percent (U+0025): X=187.0,Y=683.0 (should be at cap-height 681?)
* ampersand (U+0026): X=372.0,Y=-1.0 (should be at baseline 0?)
* ampersand (U+0026): X=417.5,Y=682.0 (should be at cap-height 681?)
* a (U+0061): X=154.5,Y=488.0 (should be at x-height 489?)
* section (U+00A7): X=212.0,Y=2.0 (should be at baseline 0?)
* section (U+00A7): X=340.5,Y=-2.0 (should be at baseline 0?)
* uni00B2 (U+00B2): X=25.0,Y=683.0 (should be at cap-height 681?)
* atilde (U+00E3): X=312.0,Y=679.0 (should be at cap-height 681?)
* ntilde (U+00F1): X=332.0,Y=679.0 (should be at cap-height 681?)
* otilde (U+00F5): X=333.0,Y=679.0 (should be at cap-height 681?)
* ccaron (U+010D): X=270.0,Y=682.0 (should be at cap-height 681?)
* eogonek (U+0119): X=351.0,Y=1.0 (should be at baseline 0?)
* ecaron (U+011B): X=268.0,Y=682.0 (should be at cap-height 681?)
* uni0122 (U+0122): X=369.5,Y=-259.0 (should be at descender -260?)
* uni0136 (U+0136): X=326.5,Y=-259.0 (should be at descender -260?)
* uni0137 (U+0137): X=281.5,Y=-259.0 (should be at descender -260?)
* uni013B (U+013B): X=277.5,Y=-259.0 (should be at descender -260?)
* uni013C (U+013C): X=156.5,Y=-259.0 (should be at descender -260?)
* uni0145 (U+0145): X=364.5,Y=-259.0 (should be at descender -260?)
* uni0146 (U+0146): X=282.5,Y=-259.0 (should be at descender -260?)
* ncaron (U+0148): X=279.0,Y=682.0 (should be at cap-height 681?)
* uni0156 (U+0156): X=310.5,Y=-259.0 (should be at descender -260?)
* uni0157 (U+0157): X=127.5,Y=-259.0 (should be at descender -260?)
* rcaron (U+0159): X=203.0,Y=682.0 (should be at cap-height 681?)
* scaron (U+0161): X=229.0,Y=682.0 (should be at cap-height 681?)
* zcaron (U+017E): X=241.0,Y=682.0 (should be at cap-height 681?)
* uni01CE (U+01CE): X=259.0,Y=682.0 (should be at cap-height 681?)
* uni0218 (U+0218): X=300.5,Y=-262.0 (should be at descender -260?)
* uni0219 (U+0219): X=243.5,Y=-259.0 (should be at descender -260?)
* uni021A (U+021A): X=287.5,Y=-259.0 (should be at descender -260?)
* uni021B (U+021B): X=238.5,Y=-259.0 (should be at descender -260?)
* caron (U+02C7): X=280.0,Y=682.0 (should be at cap-height 681?)
* tilde (U+02DC): X=333.0,Y=679.0 (should be at cap-height 681?)
* tildecomb (U+0303): X=333.0,Y=679.0 (should be at cap-height 681?)
* uni030C (U+030C): X=280.0,Y=682.0 (should be at cap-height 681?)
* uni0326 (U+0326): X=283.5,Y=-259.0 (should be at descender -260?)
* uni1EBD (U+1EBD): X=321.0,Y=679.0 (should be at cap-height 681?)
* perthousand (U+2030): X=608.0,Y=683.0 (should be at cap-height 681?)
* perthousand (U+2030): X=187.0,Y=683.0 (should be at cap-height 681?)
* uni2076 (U+2076): X=207.0,Y=682.0 (should be at cap-height 681?)
* uni2085 (U+2085): X=117.0,Y=2.0 (should be at baseline 0?)
* uni2088 (U+2088): X=340.0,Y=-1.0 (should be at baseline 0?)
* uni2089 (U+2089): X=74.0,Y=2.0 (should be at baseline 0?)
* arrowdown (U+2193): X=249.0,Y=-261.0 (should be at descender -260?)
* notequal (U+2260): X=287.0,Y=1.0 (should be at baseline 0?) [code: found-misalignments]
The following glyphs have on-curve points which have potentially incorrect y coordinates:
* ampersand (U+0026): X=422.0,Y=683.0 (should be at cap-height 681?)
* period (U+002E): X=86.0,Y=2.0 (should be at baseline 0?)
* period (U+002E): X=205.5,Y=2.0 (should be at baseline 0?)
* colon (U+003A): X=86.0,Y=2.0 (should be at baseline 0?)
* colon (U+003A): X=205.5,Y=2.0 (should be at baseline 0?)
* Q (U+0051): X=472.0,Y=1.0 (should be at baseline 0?)
* bracketleft (U+005B): X=221.0,Y=-1.0 (should be at baseline 0?)
* bracketleft (U+005B): X=325.0,Y=-1.0 (should be at baseline 0?)
* bracketright (U+005D): X=24.0,Y=-1.0 (should be at baseline 0?)
* bracketright (U+005D): X=128.0,Y=-1.0 (should be at baseline 0?)
* a (U+0061): X=149.5,Y=488.5 (should be at x-height 490?)
* a (U+0061): X=265.5,Y=-1.5 (should be at baseline 0?)
* h (U+0068): X=288.5,Y=492.0 (should be at x-height 490?)
* cent (U+00A2): X=176.0,Y=683.0 (should be at cap-height 681?)
* cent (U+00A2): X=343.0,Y=683.0 (should be at cap-height 681?)
* section (U+00A7): X=303.0,Y=2.0 (should be at baseline 0?)
* ordfeminine (U+00AA): X=107.5,Y=679.5 (should be at cap-height 681?)
* Aring (U+00C5): X=227.0,Y=938.0 (should be at ascender 940?)
* Aring (U+00C5): X=445.0,Y=938.0 (should be at ascender 940?)
* agrave (U+00E0): X=265.5,Y=-1.5 (should be at baseline 0?)
* aacute (U+00E1): X=265.5,Y=-1.5 (should be at baseline 0?)
* acircumflex (U+00E2): X=265.5,Y=-1.5 (should be at baseline 0?)
* atilde (U+00E3): X=265.5,Y=-1.5 (should be at baseline 0?)
* atilde (U+00E3): X=472.0,Y=682.0 (should be at cap-height 681?)
* adieresis (U+00E4): X=265.5,Y=-1.5 (should be at baseline 0?)
* aring (U+00E5): X=265.5,Y=-1.5 (should be at baseline 0?)
* aring (U+00E5): X=145.0,Y=683.0 (should be at cap-height 681?)
* aring (U+00E5): X=397.0,Y=683.0 (should be at cap-height 681?)
* ntilde (U+00F1): X=482.0,Y=682.0 (should be at cap-height 681?)
* otilde (U+00F5): X=479.0,Y=682.0 (should be at cap-height 681?)
* amacron (U+0101): X=265.5,Y=-1.5 (should be at baseline 0?)
* abreve (U+0103): X=265.5,Y=-1.5 (should be at baseline 0?)
* aogonek (U+0105): X=265.5,Y=-1.5 (should be at baseline 0?)
* Cdotaccent (U+010A): X=360.0,Y=941.0 (should be at ascender 940?)
* Edotaccent (U+0116): X=265.0,Y=941.0 (should be at ascender 940?)
* Gdotaccent (U+0120): X=362.0,Y=941.0 (should be at ascender 940?)
* Idotaccent (U+0130): X=132.0,Y=941.0 (should be at ascender 940?)
* Uring (U+016E): X=218.0,Y=938.0 (should be at ascender 940?)
* Uring (U+016E): X=436.0,Y=938.0 (should be at ascender 940?)
* uring (U+016F): X=148.0,Y=683.0 (should be at cap-height 681?)
* uring (U+016F): X=400.0,Y=683.0 (should be at cap-height 681?)
* Zdotaccent (U+017B): X=305.0,Y=941.0 (should be at ascender 940?)
* uni01CE (U+01CE): X=265.5,Y=-1.5 (should be at baseline 0?)
* ring (U+02DA): X=162.0,Y=683.0 (should be at cap-height 681?)
* ring (U+02DA): X=414.0,Y=683.0 (should be at cap-height 681?)
* tilde (U+02DC): X=489.0,Y=682.0 (should be at cap-height 681?)
* tildecomb (U+0303): X=489.0,Y=682.0 (should be at cap-height 681?)
* uni030A (U+030A): X=162.0,Y=683.0 (should be at cap-height 681?)
* uni030A (U+030A): X=414.0,Y=683.0 (should be at cap-height 681?)
* uni1EBD (U+1EBD): X=465.0,Y=682.0 (should be at cap-height 681?)
* ellipsis (U+2026): X=86.0,Y=2.0 (should be at baseline 0?)
* ellipsis (U+2026): X=205.5,Y=2.0 (should be at baseline 0?)
* ellipsis (U+2026): X=377.0,Y=2.0 (should be at baseline 0?)
* ellipsis (U+2026): X=496.5,Y=2.0 (should be at baseline 0?)
* ellipsis (U+2026): X=671.0,Y=2.0 (should be at baseline 0?)
* ellipsis (U+2026): X=790.5,Y=2.0 (should be at baseline 0?)
* uni2082 (U+2082): X=211.0,Y=-1.0 (should be at baseline 0?)
* uni2082 (U+2082): X=339.0,Y=-1.0 (should be at baseline 0?)
* uni2083 (U+2083): X=210.0,Y=-2.0 (should be at baseline 0?)
* uni2089 (U+2089): X=216.0,Y=1.0 (should be at baseline 0?)
* uni21C5 (U+21C5): X=681.0,Y=-258.0 (should be at descender -260?)
* emptyset (U+2205): X=295.5,Y=2.0 (should be at baseline 0?)
* integral (U+222B): X=344.0,Y=682.5 (should be at cap-height 681?)
* uni25CF (U+25CF): X=238.0,Y=-2.0 (should be at baseline 0?)
* uni25CF (U+25CF): X=508.5,Y=-2.0 (should be at baseline 0?)
* uni278A (U+278A): X=238.0,Y=-2.0 (should be at baseline 0?)
* uni278A (U+278A): X=508.5,Y=-2.0 (should be at baseline 0?)
* uni278B (U+278B): X=508.5,Y=-2.0 (should be at baseline 0?)
* uni278B (U+278B): X=238.0,Y=-2.0 (should be at baseline 0?)
* uni278C (U+278C): X=508.5,Y=-2.0 (should be at baseline 0?)
* uni278C (U+278C): X=238.0,Y=-2.0 (should be at baseline 0?)
* uni278D (U+278D): X=508.5,Y=-2.0 (should be at baseline 0?)
* uni278D (U+278D): X=238.0,Y=-2.0 (should be at baseline 0?)
* uni278E (U+278E): X=238.0,Y=-2.0 (should be at baseline 0?)
* uni278E (U+278E): X=508.5,Y=-2.0 (should be at baseline 0?)
* uni278F (U+278F): X=508.5,Y=-2.0 (should be at baseline 0?)
* uni278F (U+278F): X=238.0,Y=-2.0 (should be at baseline 0?)
* uni2790 (U+2790): X=508.5,Y=-2.0 (should be at baseline 0?)
* uni2790 (U+2790): X=238.0,Y=-2.0 (should be at baseline 0?)
* uni2791 (U+2791): X=238.0,Y=-2.0 (should be at baseline 0?)
* uni2791 (U+2791): X=508.5,Y=-2.0 (should be at baseline 0?)
* uni2792 (U+2792): X=508.0,Y=-2.0 (should be at baseline 0?)
* uni2792 (U+2792): X=237.5,Y=-2.0 (should be at baseline 0?)
* u1F10C (U+1F10C): X=238.0,Y=-2.0 (should be at baseline 0?)
* u1F10C (U+1F10C): X=508.5,Y=-2.0 (should be at baseline 0?) [code: found-misalignments]
The following glyphs have on-curve points which have potentially incorrect y coordinates:
* ampersand (U+0026): X=371.0,Y=0.5 (should be at baseline 0?)
* ampersand (U+0026): X=188.0,Y=680.5 (should be at cap-height 681?)
* Q (U+0051): X=475.5,Y=1.0 (should be at baseline 0?)
* S (U+0053): X=192.5,Y=1.0 (should be at baseline 0?)
* a (U+0061): X=291.0,Y=-1.5 (should be at baseline 0?)
* f (U+0066): X=305.0,Y=680.0 (should be at cap-height 681?)
* r (U+0072): X=324.0,Y=489.0 (should be at x-height 488?)
* t (U+0074): X=309.0,Y=1.0 (should be at baseline 0?)
* braceleft (U+007B): X=149.0,Y=-1.0 (should be at baseline 0?)
* braceright (U+007D): X=163.0,Y=-1.0 (should be at baseline 0?)
* ordfeminine (U+00AA): X=131.0,Y=683.0 (should be at cap-height 681?)
* paragraph (U+00B6): X=195.5,Y=679.5 (should be at cap-height 681?)
* Agrave (U+00C0): X=233.0,Y=942.0 (should be at ascender 940?)
* Aacute (U+00C1): X=423.0,Y=942.0 (should be at ascender 940?)
* Acircumflex (U+00C2): X=329.0,Y=942.0 (should be at ascender 940?)
* Egrave (U+00C8): X=194.0,Y=942.0 (should be at ascender 940?)
* Eacute (U+00C9): X=384.0,Y=942.0 (should be at ascender 940?)
* Ecircumflex (U+00CA): X=290.0,Y=942.0 (should be at ascender 940?)
* Igrave (U+00CC): X=37.0,Y=942.0 (should be at ascender 940?)
* Iacute (U+00CD): X=227.0,Y=942.0 (should be at ascender 940?)
* Ograve (U+00D2): X=284.0,Y=942.0 (should be at ascender 940?)
* Oacute (U+00D3): X=474.0,Y=942.0 (should be at ascender 940?)
* Ocircumflex (U+00D4): X=380.0,Y=942.0 (should be at ascender 940?)
* Ugrave (U+00D9): X=246.0,Y=942.0 (should be at ascender 940?)
* Uacute (U+00DA): X=436.0,Y=942.0 (should be at ascender 940?)
* Ucircumflex (U+00DB): X=342.0,Y=942.0 (should be at ascender 940?)
* Yacute (U+00DD): X=368.0,Y=942.0 (should be at ascender 940?)
* agrave (U+00E0): X=291.0,Y=-1.5 (should be at baseline 0?)
* aacute (U+00E1): X=291.0,Y=-1.5 (should be at baseline 0?)
* acircumflex (U+00E2): X=291.0,Y=-1.5 (should be at baseline 0?)
* atilde (U+00E3): X=291.0,Y=-1.5 (should be at baseline 0?)
* atilde (U+00E3): X=110.0,Y=679.0 (should be at cap-height 681?)
* adieresis (U+00E4): X=291.0,Y=-1.5 (should be at baseline 0?)
* aring (U+00E5): X=291.0,Y=-1.5 (should be at baseline 0?)
* ntilde (U+00F1): X=144.0,Y=679.0 (should be at cap-height 681?)
* otilde (U+00F5): X=151.0,Y=679.0 (should be at cap-height 681?)
* amacron (U+0101): X=291.0,Y=-1.5 (should be at baseline 0?)
* abreve (U+0103): X=291.0,Y=-1.5 (should be at baseline 0?)
* aogonek (U+0105): X=359.0,Y=2.0 (should be at baseline 0?)
* aogonek (U+0105): X=291.0,Y=-1.5 (should be at baseline 0?)
* Cacute (U+0106): X=464.0,Y=942.0 (should be at ascender 940?)
* Ccaron (U+010C): X=280.0,Y=942.0 (should be at ascender 940?)
* Ccaron (U+010C): X=463.0,Y=942.0 (should be at ascender 940?)
* Dcaron (U+010E): X=240.0,Y=942.0 (should be at ascender 940?)
* Dcaron (U+010E): X=423.0,Y=942.0 (should be at ascender 940?)
* Ecaron (U+011A): X=200.0,Y=942.0 (should be at ascender 940?)
* Ecaron (U+011A): X=383.0,Y=942.0 (should be at ascender 940?)
* Lacute (U+0139): X=227.0,Y=942.0 (should be at ascender 940?)
* lacute (U+013A): X=205.0,Y=942.0 (should be at ascender 940?)
* Nacute (U+0143): X=464.0,Y=942.0 (should be at ascender 940?)
* Ncaron (U+0147): X=280.0,Y=942.0 (should be at ascender 940?)
* Ncaron (U+0147): X=463.0,Y=942.0 (should be at ascender 940?)
* Racute (U+0154): X=401.0,Y=942.0 (should be at ascender 940?)
* Rcaron (U+0158): X=217.0,Y=942.0 (should be at ascender 940?)
* Rcaron (U+0158): X=400.0,Y=942.0 (should be at ascender 940?)
* Sacute (U+015A): X=192.5,Y=1.0 (should be at baseline 0?)
* Sacute (U+015A): X=378.0,Y=942.0 (should be at ascender 940?)
* Scedilla (U+015E): X=192.5,Y=1.0 (should be at baseline 0?)
* Scaron (U+0160): X=192.5,Y=1.0 (should be at baseline 0?)
* Scaron (U+0160): X=194.0,Y=942.0 (should be at ascender 940?)
* Scaron (U+0160): X=377.0,Y=942.0 (should be at ascender 940?)
* Tcaron (U+0164): X=181.0,Y=942.0 (should be at ascender 940?)
* Tcaron (U+0164): X=364.0,Y=942.0 (should be at ascender 940?)
* tcaron (U+0165): X=309.0,Y=1.0 (should be at baseline 0?)
* tcaron (U+0165): X=340.0,Y=683.0 (should be at cap-height 681?)
* Uogonek (U+0172): X=420.0,Y=-2.0 (should be at baseline 0?)
* Wcircumflex (U+0174): X=481.0,Y=942.0 (should be at ascender 940?)
* Ycircumflex (U+0176): X=274.0,Y=942.0 (should be at ascender 940?)
* Zacute (U+0179): X=383.0,Y=942.0 (should be at ascender 940?)
* Zcaron (U+017D): X=199.0,Y=942.0 (should be at ascender 940?)
* Zcaron (U+017D): X=382.0,Y=942.0 (should be at ascender 940?)
* uni01CD (U+01CD): X=239.0,Y=942.0 (should be at ascender 940?)
* uni01CD (U+01CD): X=422.0,Y=942.0 (should be at ascender 940?)
* uni01CE (U+01CE): X=291.0,Y=-1.5 (should be at baseline 0?)
* uni0218 (U+0218): X=192.5,Y=1.0 (should be at baseline 0?)
* uni021B (U+021B): X=309.0,Y=1.0 (should be at baseline 0?)
* tilde (U+02DC): X=137.0,Y=679.0 (should be at cap-height 681?)
* tildecomb (U+0303): X=137.0,Y=679.0 (should be at cap-height 681?)
* pi (U+03C0): X=604.0,Y=1.0 (should be at baseline 0?)
* Wgrave (U+1E80): X=385.0,Y=942.0 (should be at ascender 940?)
* Wacute (U+1E82): X=575.0,Y=942.0 (should be at ascender 940?)
* uni1EBD (U+1EBD): X=141.0,Y=679.0 (should be at cap-height 681?)
* Ygrave (U+1EF2): X=178.0,Y=942.0 (should be at ascender 940?)
* uni2083 (U+2083): X=74.0,Y=-2.0 (should be at baseline 0?)
* uni2088 (U+2088): X=230.0,Y=-2.0 (should be at baseline 0?)
* uni2088 (U+2088): X=111.0,Y=-2.0 (should be at baseline 0?)
* uni2196 (U+2196): X=749.0,Y=-2.0 (should be at baseline 0?)
* partialdiff (U+2202): X=200.0,Y=683.0 (should be at cap-height 681?)
* emptyset (U+2205): X=765.0,Y=683.0 (should be at cap-height 681?)
* integral (U+222B): X=68.0,Y=-262.0 (should be at descender -260?)
* uni25CC (U+25CC): X=357.5,Y=1.5 (should be at baseline 0?)
* uni25CC (U+25CC): X=406.5,Y=1.5 (should be at baseline 0?)
* fi (U+FB01): X=305.0,Y=680.0 (should be at cap-height 681?)
* fl (U+FB02): X=305.0,Y=680.0 (should be at cap-height 681?) [code: found-misalignments]
The following glyphs have segments which seem very short:
* at (U+0040) contains a short segment B<<582.0,352.0>-<580.0,339.0>-<576.5,319.5>>
* at (U+0040) contains a short segment B<<573.0,285.0>-<573.0,268.0>-<584.0,257.5>>
* at (U+0040) contains a short segment B<<584.0,257.5>-<595.0,247.0>-<612.0,247.0>>
* m (U+006D) contains a short segment B<<490.0,316.0>-<490.0,307.0>-<490.0,296.0>>
* sterling (U+00A3) contains a short segment B<<275.0,243.0>-<276.0,236.0>-<276.0,228.0>>
* sterling (U+00A3) contains a short segment B<<153.0,234.0>-<153.0,239.0>-<152.0,243.0>>
* eogonek (U+0119) contains a short segment B<<512.0,223.0>-<511.0,213.0>-<510.0,206.0>>
* eogonek (U+0119) contains a short segment B<<333.5,-139.5>-<343.0,-137.0>-<349.0,-134.0>>
* Eng (U+014A) contains a short segment B<<469.5,-190.5>-<453.0,-186.0>-<449.0,-184.0>>
* Eng (U+014A) contains a short segment B<<449.0,-74.0>-<454.0,-75.0>-<461.5,-76.5>>
* Eng (U+014A) contains a short segment B<<461.5,-76.5>-<469.0,-78.0>-<480.0,-78.0>>
* eng (U+014B) contains a short segment B<<301.0,-74.0>-<307.0,-75.0>-<314.5,-76.5>>
* Uogonek (U+0172) contains a short segment B<<387.0,-142.0>-<395.0,-142.0>-<405.0,-139.5>>
* Uogonek (U+0172) contains a short segment B<<405.0,-139.5>-<415.0,-137.0>-<421.0,-134.0>>
* uogonek (U+0173) contains a short segment B<<463.0,-142.0>-<471.0,-142.0>-<481.0,-139.5>>
* uogonek (U+0173) contains a short segment B<<481.0,-139.5>-<491.0,-137.0>-<497.0,-134.0>>
* trademark (U+2122) contains a short segment L<<588.0,482.0>--<590.0,482.0>>
* lozenge (U+25CA) contains a short segment L<<34.0,335.0>--<34.0,346.0>>
* lozenge (U+25CA) contains a short segment L<<567.0,346.0>--<567.0,335.0>> [code: found-short-segments]
The following glyphs have segments which seem very short:
* at (U+0040) contains a short segment B<<596.0,351.0>-<593.0,338.0>-<591.0,322.5>>
* at (U+0040) contains a short segment B<<591.0,322.5>-<589.0,307.0>-<589.0,295.0>>
* uni00B5 (U+00B5) contains a short segment B<<217.0,-13.0>-<210.0,-13.0>-<203.0,-13.0>>
* Eng (U+014A) contains a short segment B<<436.5,-208.0>-<419.0,-204.0>-<414.0,-201.0>>
* Eng (U+014A) contains a short segment B<<414.0,-65.0>-<420.0,-66.0>-<427.5,-67.0>>
* Eng (U+014A) contains a short segment B<<427.5,-67.0>-<435.0,-68.0>-<447.0,-68.0>>
* eng (U+014B) contains a short segment B<<282.0,-48.0>-<288.0,-50.0>-<295.0,-51.0>>
* Euro (U+20AC) contains a short segment B<<248.0,325.0>-<248.0,317.0>-<249.0,309.0>>
* Euro (U+20AC) contains a short segment B<<84.0,309.0>-<84.0,317.0>-<84.0,325.0>>
* Euro (U+20AC) contains a short segment B<<84.0,325.0>-<84.0,333.0>-<84.0,341.0>>
* Euro (U+20AC) contains a short segment B<<249.0,341.0>-<248.0,333.0>-<248.0,325.0>>
* trademark (U+2122) contains a short segment L<<608.0,504.0>--<610.0,504.0>>
* lozenge (U+25CA) contains a short segment L<<20.0,334.0>--<20.0,345.0>>
* lozenge (U+25CA) contains a short segment L<<586.0,345.0>--<586.0,334.0>> [code: found-short-segments]
The following glyphs have segments which seem very short:
* at (U+0040) contains a short segment B<<575.0,352.0>-<573.0,340.0>-<569.5,318.5>>
* at (U+0040) contains a short segment B<<578.0,248.0>-<590.0,236.0>-<609.0,236.0>>
* sterling (U+00A3) contains a short segment B<<155.0,227.0>-<155.0,236.0>-<154.0,245.0>>
* registered (U+00AE) contains a short segment L<<332.0,417.0>--<332.0,417.0>>
* eogonek (U+0119) contains a short segment B<<512.5,225.5>-<512.0,217.0>-<511.0,210.0>>
* Eng (U+014A) contains a short segment B<<485.5,-182.5>-<470.0,-178.0>-<465.0,-176.0>>
* Eng (U+014A) contains a short segment B<<465.0,-78.0>-<471.0,-80.0>-<478.5,-81.5>>
* Eng (U+014A) contains a short segment B<<478.5,-81.5>-<486.0,-83.0>-<497.0,-83.0>>
* eng (U+014B) contains a short segment B<<310.0,-86.0>-<316.0,-87.0>-<323.5,-89.0>>
* oe (U+0153) contains a short segment B<<868.0,224.5>-<867.0,215.0>-<866.0,209.0>>
* Uogonek (U+0172) contains a short segment B<<385.0,-150.0>-<394.0,-150.0>-<404.5,-147.5>>
* Uogonek (U+0172) contains a short segment B<<404.5,-147.5>-<415.0,-145.0>-<421.0,-142.0>>
* uogonek (U+0173) contains a short segment B<<474.5,-147.5>-<485.0,-145.0>-<492.0,-142.0>>
* trademark (U+2122) contains a short segment L<<578.0,471.0>--<580.0,471.0>>
* uni2284 (U+2284) contains a short segment L<<308.0,10.0>--<308.0,10.0>>
* uni2285 (U+2285) contains a short segment L<<350.0,496.0>--<350.0,496.0>> [code: found-short-segments]
The following glyphs have segments which seem very short:
* at (U+0040) contains a short segment B<<589.0,351.0>-<586.0,338.0>-<583.5,321.0>>
* at (U+0040) contains a short segment B<<583.5,321.0>-<581.0,304.0>-<581.0,290.0>>
* at (U+0040) contains a short segment B<<581.0,290.0>-<581.0,275.0>-<590.0,266.5>>
* at (U+0040) contains a short segment B<<590.0,266.5>-<599.0,258.0>-<615.0,258.0>>
* m (U+006D) contains a short segment B<<496.0,310.0>-<496.0,304.0>-<496.0,298.0>>
* sterling (U+00A3) contains a short segment B<<286.0,241.0>-<286.0,238.0>-<286.0,234.0>>
* sterling (U+00A3) contains a short segment L<<150.0,241.0>--<150.0,241.0>>
* Eng (U+014A) contains a short segment B<<454.0,-199.0>-<437.0,-195.0>-<432.0,-193.0>>
* Eng (U+014A) contains a short segment B<<432.0,-69.0>-<438.0,-71.0>-<445.5,-72.0>>
* Eng (U+014A) contains a short segment B<<445.5,-72.0>-<453.0,-73.0>-<464.0,-73.0>>
* eng (U+014B) contains a short segment B<<292.0,-62.0>-<298.0,-63.0>-<305.0,-64.0>>
* Euro (U+20AC) contains a short segment B<<240.0,328.0>-<240.0,317.0>-<241.0,308.0>>
* Euro (U+20AC) contains a short segment B<<93.0,308.0>-<93.0,318.0>-<93.0,328.0>>
* Euro (U+20AC) contains a short segment B<<93.0,328.0>-<93.0,338.0>-<93.0,348.0>>
* Euro (U+20AC) contains a short segment B<<241.0,348.0>-<240.0,338.0>-<240.0,328.0>>
* trademark (U+2122) contains a short segment L<<598.0,492.0>--<600.0,492.0>>
* lozenge (U+25CA) contains a short segment L<<27.0,334.0>--<27.0,345.0>>
* lozenge (U+25CA) contains a short segment L<<576.0,345.0>--<576.0,334.0>> [code: found-short-segments]
The following glyphs have segments which seem very short:
* eth (U+00F0) contains a short segment L<<112.0,711.0>--<127.0,708.0>>
* Eng (U+014A) contains a short segment B<<416.5,-218.0>-<398.0,-214.0>-<393.0,-212.0>>
* Eng (U+014A) contains a short segment B<<393.0,-59.0>-<399.0,-60.0>-<406.0,-61.0>>
* Eng (U+014A) contains a short segment B<<406.0,-61.0>-<413.0,-62.0>-<426.0,-62.0>>
* eng (U+014B) contains a short segment B<<271.0,-33.0>-<277.0,-34.0>-<283.5,-35.0>>
* Euro (U+20AC) contains a short segment B<<258.0,322.0>-<258.0,316.0>-<258.0,310.0>>
* Euro (U+20AC) contains a short segment B<<74.0,310.0>-<74.0,316.0>-<74.0,322.0>>
* Euro (U+20AC) contains a short segment B<<74.0,322.0>-<74.0,328.0>-<74.0,333.0>>
* Euro (U+20AC) contains a short segment B<<258.0,333.0>-<258.0,328.0>-<258.0,322.0>>
* trademark (U+2122) contains a short segment L<<621.0,517.0>--<623.0,517.0>>
* trademark (U+2122) contains a short segment B<<716.5,452.0>-<714.0,440.0>-<713.0,437.0>>
* uni216F (U+216F) contains a short segment B<<644.0,367.0>-<637.0,347.0>-<633.5,337.5>>
* uni216F (U+216F) contains a short segment B<<633.5,337.5>-<630.0,328.0>-<628.0,321.0>>
* uni216F (U+216F) contains a short segment B<<301.0,320.0>-<300.0,325.0>-<295.5,338.0>>
* uni216F (U+216F) contains a short segment B<<295.5,338.0>-<291.0,351.0>-<286.0,366.0>>
* lozenge (U+25CA) contains a short segment L<<12.0,334.0>--<12.0,345.0>>
* lozenge (U+25CA) contains a short segment L<<597.0,345.0>--<597.0,334.0>> [code: found-short-segments]
The following glyphs have segments which seem very short:
* three (U+0033) contains a short segment B<<178.5,405.0>-<185.0,405.0>-<196.0,405.0>>
* G (U+0047) contains a short segment B<<702.0,348.0>-<705.0,338.0>-<706.5,325.0>>
* M (U+004D) contains a short segment L<<437.0,184.0>--<440.0,184.0>>
* e (U+0065) contains a short segment B<<512.5,228.5>-<512.0,221.0>-<511.0,215.0>>
* m (U+006D) contains a short segment B<<475.0,328.0>-<476.0,319.0>-<476.0,309.5>>
* m (U+006D) contains a short segment B<<476.0,309.5>-<476.0,300.0>-<476.0,291.0>>
* registered (U+00AE) contains a short segment L<<334.0,436.0>--<331.0,436.0>>
* ae (U+00E6) contains a short segment B<<327.0,281.0>-<327.0,282.0>-<327.0,283.0>>
* egrave (U+00E8) contains a short segment B<<512.5,228.5>-<512.0,221.0>-<511.0,215.0>>
* eacute (U+00E9) contains a short segment B<<512.5,228.5>-<512.0,221.0>-<511.0,215.0>>
* ecircumflex (U+00EA) contains a short segment B<<512.5,228.5>-<512.0,221.0>-<511.0,215.0>>
* edieresis (U+00EB) contains a short segment B<<512.5,228.5>-<512.0,221.0>-<511.0,215.0>>
* emacron (U+0113) contains a short segment B<<512.5,228.5>-<512.0,221.0>-<511.0,215.0>>
* edotaccent (U+0117) contains a short segment B<<512.5,228.5>-<512.0,221.0>-<511.0,215.0>>
* eogonek (U+0119) contains a short segment B<<513.0,243.0>-<513.0,236.0>-<512.5,228.5>>
* eogonek (U+0119) contains a short segment B<<512.5,228.5>-<512.0,221.0>-<511.0,215.0>>
* ecaron (U+011B) contains a short segment B<<512.5,228.5>-<512.0,221.0>-<511.0,215.0>>
* Gbreve (U+011E) contains a short segment B<<702.0,348.0>-<705.0,338.0>-<706.5,325.0>>
* Gdotaccent (U+0120) contains a short segment B<<702.0,348.0>-<705.0,338.0>-<706.5,325.0>>
* uni0122 (U+0122) contains a short segment B<<702.0,348.0>-<705.0,338.0>-<706.5,325.0>>
* Eng (U+014A) contains a short segment B<<503.0,-173.5>-<488.0,-169.0>-<483.0,-167.0>>
* Eng (U+014A) contains a short segment B<<483.0,-83.0>-<488.0,-84.0>-<496.0,-86.0>>
* Eng (U+014A) contains a short segment B<<496.0,-86.0>-<504.0,-88.0>-<514.0,-88.0>>
* eng (U+014B) contains a short segment B<<320.0,-99.0>-<325.0,-100.0>-<333.0,-102.0>>
* eng (U+014B) contains a short segment B<<333.0,-102.0>-<341.0,-104.0>-<351.0,-104.0>>
* oe (U+0153) contains a short segment B<<873.0,243.0>-<873.0,236.0>-<872.5,228.0>>
* oe (U+0153) contains a short segment B<<872.5,228.0>-<872.0,220.0>-<871.0,215.0>>
* Uogonek (U+0172) contains a short segment B<<382.0,-159.0>-<392.0,-159.0>-<403.5,-156.0>>
* Uogonek (U+0172) contains a short segment B<<403.5,-156.0>-<415.0,-153.0>-<422.0,-150.0>>
* uni1EBD (U+1EBD) contains a short segment B<<512.5,228.5>-<512.0,221.0>-<511.0,215.0>>
* trademark (U+2122) contains a short segment L<<567.0,460.0>--<569.0,460.0>>
* uni2209 (U+2209) contains a short segment L<<308.0,10.0>--<303.0,10.0>>
* uni2284 (U+2284) contains a short segment L<<308.0,10.0>--<303.0,10.0>>
* uni2285 (U+2285) contains a short segment L<<362.0,498.0>--<367.0,498.0>> [code: found-short-segments]
The following glyphs have colinear vectors:
* exclam (U+0021): L<<220.0,712.0>--<210.0,381.0>> -> L<<210.0,381.0>--<198.0,221.0>>
* exclam (U+0021): L<<89.0,221.0>--<77.0,381.0>> -> L<<77.0,381.0>--<67.0,712.0>>
* exclamdown (U+00A1): L<<199.0,307.0>--<211.0,147.0>> -> L<<211.0,147.0>--<221.0,-183.0>>
* exclamdown (U+00A1): L<<68.0,-183.0>--<77.0,147.0>> -> L<<77.0,147.0>--<90.0,307.0>>
* trademark (U+2122): L<<483.0,522.0>--<478.0,442.0>> -> L<<478.0,442.0>--<459.0,300.0>>
* trademark (U+2122): L<<718.0,300.0>--<699.0,442.0>> -> L<<699.0,442.0>--<694.0,522.0>>
* uni216F (U+216F): L<<278.0,454.0>--<260.0,355.0>> -> L<<260.0,355.0>--<221.0,125.0>>
* uni216F (U+216F): L<<730.0,125.0>--<692.0,355.0>> -> L<<692.0,355.0>--<674.0,455.0>> [code: found-colinear-vectors]
The following glyphs have colinear vectors:
* exclam (U+0021): L<<230.0,714.0>--<221.0,390.0>> -> L<<221.0,390.0>--<208.0,225.0>>
* exclam (U+0021): L<<75.0,225.0>--<63.0,390.0>> -> L<<63.0,390.0>--<53.0,714.0>>
* exclamdown (U+00A1): L<<209.0,298.0>--<222.0,133.0>> -> L<<222.0,133.0>--<231.0,-191.0>>
* exclamdown (U+00A1): L<<54.0,-191.0>--<63.0,134.0>> -> L<<63.0,134.0>--<76.0,298.0>>
* m (U+006D): L<<504.0,303.0>--<504.0,301.0>> -> L<<504.0,301.0>--<504.0,0.0>>
* trademark (U+2122): L<<507.0,497.0>--<503.0,420.0>> -> L<<503.0,420.0>--<489.0,288.0>>
* trademark (U+2122): L<<730.0,288.0>--<715.0,420.0>> -> L<<715.0,420.0>--<711.0,496.0>>
* uni216F (U+216F): L<<283.0,400.0>--<273.0,328.0>> -> L<<273.0,328.0>--<244.0,154.0>>
* uni216F (U+216F): L<<694.0,154.0>--<665.0,328.0>> -> L<<665.0,328.0>--<655.0,400.0>> [code: found-colinear-vectors]
The following glyphs have colinear vectors:
* exclam (U+0021): L<<215.0,710.0>--<205.0,377.0>> -> L<<205.0,377.0>--<193.0,219.0>>
* exclam (U+0021): L<<96.0,219.0>--<84.0,377.0>> -> L<<84.0,377.0>--<74.0,710.0>>
* exclamdown (U+00A1): L<<194.0,311.0>--<206.0,154.0>> -> L<<206.0,154.0>--<216.0,-180.0>>
* exclamdown (U+00A1): L<<75.0,-180.0>--<84.0,153.0>> -> L<<84.0,153.0>--<97.0,311.0>>
* trademark (U+2122): L<<471.0,532.0>--<466.0,453.0>> -> L<<466.0,453.0>--<444.0,305.0>>
* trademark (U+2122): L<<713.0,305.0>--<691.0,453.0>> -> L<<691.0,453.0>--<686.0,532.0>>
* uni216F (U+216F): L<<276.0,481.0>--<254.0,368.0>> -> L<<254.0,368.0>--<210.0,111.0>>
* uni216F (U+216F): L<<748.0,111.0>--<704.0,368.0>> -> L<<704.0,368.0>--<683.0,481.0>>
* uni2285 (U+2285): L<<50.0,496.0>--<350.0,496.0>> -> L<<350.0,496.0>--<350.0,496.0>> [code: found-colinear-vectors]
The following glyphs have colinear vectors:
* exclam (U+0021): L<<225.0,713.0>--<215.0,385.0>> -> L<<215.0,385.0>--<203.0,223.0>>
* exclam (U+0021): L<<82.0,223.0>--<70.0,386.0>> -> L<<70.0,386.0>--<60.0,713.0>>
* exclamdown (U+00A1): L<<204.0,303.0>--<216.0,141.0>> -> L<<216.0,141.0>--<226.0,-187.0>>
* exclamdown (U+00A1): L<<61.0,-187.0>--<70.0,141.0>> -> L<<70.0,141.0>--<83.0,303.0>>
* trademark (U+2122): L<<495.0,510.0>--<490.0,431.0>> -> L<<490.0,431.0>--<473.0,294.0>>
* trademark (U+2122): L<<724.0,294.0>--<707.0,431.0>> -> L<<707.0,431.0>--<702.0,510.0>>
* uni216F (U+216F): L<<280.0,428.0>--<266.0,342.0>> -> L<<266.0,342.0>--<232.0,139.0>>
* uni216F (U+216F): L<<712.0,139.0>--<679.0,342.0>> -> L<<679.0,342.0>--<665.0,428.0>> [code: found-colinear-vectors]
The following glyphs have colinear vectors:
* exclam (U+0021): L<<237.0,716.0>--<228.0,395.0>> -> L<<228.0,395.0>--<215.0,228.0>>
* exclam (U+0021): L<<66.0,228.0>--<54.0,396.0>> -> L<<54.0,396.0>--<44.0,716.0>>
* exclamdown (U+00A1): L<<216.0,293.0>--<229.0,125.0>> -> L<<229.0,125.0>--<238.0,-195.0>>
* exclamdown (U+00A1): L<<45.0,-195.0>--<54.0,126.0>> -> L<<54.0,126.0>--<67.0,293.0>>
* trademark (U+2122): L<<522.0,480.0>--<518.0,406.0>> -> L<<518.0,406.0>--<507.0,281.0>>
* trademark (U+2122): L<<737.0,281.0>--<725.0,406.0>> -> L<<725.0,406.0>--<721.0,479.0>>
* uni216F (U+216F): L<<286.0,366.0>--<281.0,311.0>> -> L<<281.0,311.0>--<258.0,172.0>>
* uni216F (U+216F): L<<671.0,172.0>--<649.0,312.0>> -> L<<649.0,312.0>--<644.0,367.0>> [code: found-colinear-vectors]
The following glyphs have colinear vectors:
* exclam (U+0021): L<<103.0,217.0>--<91.0,372.0>> -> L<<91.0,372.0>--<81.0,709.0>>
* exclam (U+0021): L<<209.0,709.0>--<199.0,373.0>> -> L<<199.0,373.0>--<187.0,217.0>>
* exclamdown (U+00A1): L<<188.0,316.0>--<200.0,161.0>> -> L<<200.0,161.0>--<210.0,-176.0>>
* exclamdown (U+00A1): L<<82.0,-176.0>--<92.0,160.0>> -> L<<92.0,160.0>--<104.0,316.0>>
* registered (U+00AE): L<<334.0,436.0>--<331.0,436.0>> -> L<<331.0,436.0>--<301.0,436.0>>
* trademark (U+2122): L<<459.0,543.0>--<453.0,465.0>> -> L<<453.0,465.0>--<429.0,311.0>>
* trademark (U+2122): L<<707.0,311.0>--<683.0,465.0>> -> L<<683.0,465.0>--<677.0,543.0>>
* uni216F (U+216F): L<<273.0,509.0>--<247.0,382.0>> -> L<<247.0,382.0>--<198.0,96.0>>
* uni216F (U+216F): L<<767.0,96.0>--<718.0,382.0>> -> L<<718.0,382.0>--<692.0,509.0>>
* uni2209 (U+2209): L<<619.0,10.0>--<308.0,10.0>> -> L<<308.0,10.0>--<303.0,10.0>>
* uni2284 (U+2284): L<<619.0,10.0>--<308.0,10.0>> -> L<<308.0,10.0>--<303.0,10.0>>
* uni2285 (U+2285): L<<51.0,498.0>--<362.0,498.0>> -> L<<362.0,498.0>--<367.0,498.0>> [code: found-colinear-vectors]
The following glyphs have jaggy segments:
* trademark (U+2122): L<<715.0,420.0>--<711.0,496.0>>/B<<711.0,496.0>-<708.0,481.0>-<705.0,467.5>> = 14.322719978203523 [code: found-jaggy-segments]
The following glyphs have jaggy segments:
* trademark (U+2122): L<<707.0,431.0>--<702.0,510.0>>/B<<702.0,510.0>-<699.0,494.0>-<695.5,479.5>> = 14.24113998027248 [code: found-jaggy-segments]
The following glyphs have jaggy segments:
* trademark (U+2122): L<<725.0,406.0>--<721.0,479.0>>/B<<721.0,479.0>-<719.0,464.0>-<716.5,452.0>> = 10.731001736924052 [code: found-jaggy-segments]